Due to the particularity of stair steps, special attention should be paid to several points such as anti-skid and anti-fouling during maintenance.

1. The choice of machinery The maintenance of the stair stone is originally a professional machine called the stair crystal surface machine. But in actual use, this kind of machinery has certain problems. On the one hand, the stair machine is relatively heavy, and it is easy to hit the baffles and pillars on both sides during operation. And these places are often where the stairs are most distinctive and decorative. For example, delicate pillars are easily damaged, as are the timber baffles, glass baffles, and stone baffles on both sides. On the other hand, the stair machine can only process the surface of the board, but not the facade and lines. Therefore, we recommend using a portable polishing machine for processing, which is portable and easy for workers to control; secondly, it can also handle lines and facades.

2. The selection of maintenance materials must take into account the anti-skid maintenance of stairs. Do not use materials with high wax content, such as 2501, etc. After these materials are maintained, the stone will become very slippery and it is very dangerous to use on stairs. It is recommended to use some high-density maintenance materials, such as the use of crystal face paste sealing technology, its high-density silicon dioxide component, a protective layer formed on the surface, anti-fouling, non-slip, super resistant to stepping, and frequently used in stairs Area is the best material.

At the same time, maintenance should not require that the bottom light of the stair stone is too high, as long as the surface is cleaned and dry, and then directly maintained on it, to prevent the high light from causing insecurity.

This Block shaving machine mainly for processing waste material left bottom for secondary processing, make the most of the companies will originally as a waste or garbage disposal plate bottom, through this equipment is processed into the corresponding plate, improve the value of the bottom of the plate, really achieve the purpose of the waste, save resources, improve efficiency.

This device feed with vanable frequency speed reduces the amount of knife to panel traits flexible settings, simple operation, high efficiency of processing a setting, finished processing is stopped automatically, and multiple devices require only one person may be required to operate.

DAFON popular product is stone cutting machine line for kerbstone/curbstone/paver stone, multi-saw block cutter, Infrared bridge cutting machine, stone splitting machine, chamfering machine, automatic edge cutting machine, bush hammer machine, automatic polishing machine, flaming machine, quarry equipment, stone crusher, stone engraving machine and so on.

3.Stair protection must be in place. The reason why the protection of the stair stone is important is that the narrow environment of the stairs and various anti-skid treatments make it easy to trap dirt. For adequate protection, antifouling treatment can be used if possible, which is convenient for cleaning and long-term maintenance of its decoration and functionality.

4. Focus on the side of the handrail. Because people are used to holding the handrail up and down, the use of the stairs on the side close to the handrail is the heaviest. Various problems such as scratches, abrasion, and breakage generally occur on this site. Therefore, you need to focus on this site during maintenance. During maintenance, crystallization or glaze sealing can be done several times on this site, which can offset the stone consumption caused by heavy use to a certain extent. Do it a few more times in the armrest area.

Contact:

Daisy Huang

Whatsapp&wechat:+86 18859970759

Email:daisy@dafonmachine.com

Website: www.dafonmachine.com