First, the standard for paving stone countertops and standing slabs for floor-to-ceiling windows

1. The window sleeve line of the floor-to-ceiling window falls to the ground, the stone table board is embedded between the two window sleeve lines, and the edge of the table board is at least 3mm behind the window sleeve line;

2. The stone vertical slab is embedded in the linear inner opening of the table, and the distance between the vertical and the linear outer opening of the table is 20-30mm. The standards of the same project should be consistent;

3. The wooden skirting line stops on both sides of the window cover line and is lower than the thickness of the window cover line.

The chamfering machine can be combined with Kerbstone cutting machine as a whole line for curbstone cutting, only 4 workers needed from loading to packaging the finished products.

DAFON main product is Curbstone/kerbstone/paver stone cutting machine line, we also have marble block cutter, Infrared bridge type cutter, edge grinding machine, automatic edge cutting machine, bush hammer machine, flaming machine, automatic line polisher, quarry equipment, stone splitting machine and so on.

Contact:

Daisy Huang

Whatsapp&wechat:+86 18859970759

Email:daisy@dafonmachine.com

Website:www.dafonmachine.com

Second, the extended length and width standard of high window sill board

The extension length of the window sill surface exceeds the outer openings of the window cover on both sides by 30 mm, and the extension width of the board surface exceeds the thickest point of the front surface of the window cover by 20 mm (the extension length and width of the board surface do not count the linear width).

Three, kitchen and bathroom door cover stone base standard

The size of the stone base of the kitchen and bathroom door and window sleeve line is the same as the wooden base of the bedroom door sleeve, and the general height is 250mm. The width of the line base is the same as the sleeve line, or the outer width of the sleeve line is 5-10mm, the thickness is higher than the sleeve Line 5-10mm (the same project standard should be consistent).