1. Marble is easily contaminated. Use less water when cleaning. Wipe regularly with a slightly damp cloth with a mild detergent, then dry and polish with a clean soft cloth to restore it to shine. Or use liquid scrubbing agent to wipe it carefully. You can use lemon juice or vinegar to clean the stains, but it is best not to leave the lemon on it for more than 2 minutes. Repeat the operation if necessary, then wash and dry. For cosmetics, tea, and tobacco stains, apply hydrogen peroxide, leave for two hours, and then wash and dry. For oil stains, use ethanol (alcohol), acetone (wood spirit), or lighter oil to wipe, then wash and dry. If the marble furniture is burnt by cigarette butts, you should consider asking someone to repair it.

2. For minor scratches, special marble polishing powder and care agents can be used. For old or expensive marble furniture, professionals should be dealt with.

This maintenance method is called the stone recrystallization system. This system has two parts, one part refers to the machine tool part, and the other part refers to some special chemical materials; the chemical materials are also divided into two categories: one is the granite recrystallization system, The other is the marble recrystallization system.

Its basic principle is to combine some chemical special materials with the heat generated by friction under the action of machinery, and to combine with the structure and organization of the stone surface layer and micro-rheological reaction, thereby producing a new harder and brighter texture. Crystal layer, using these stone recrystallization systems to maintain granite and marble floors, can make the stone floor get bright, fresh, and natural effects.

Engraving machine features:

1. High-speed processing: the speed of the curved straight line is consistent with the running speed reaching more than 16 meters/minute.

2. Excellent components: imported linear guide rail, excellent stepping system, imported bearings, high-power spindle motor.

3. Reasonable design: It adopts advanced high-precision gear rack transmission, with fast speed and high precision.

DAFON hot sale product is Curbstone/kerbstone/paver stone/roadside stone cutting machine line, we also have multiblade block cutter, edge bridge cutting machine, kerbstone slicing machine, bottom slab cutting machine, chamfering machine, bush hammer machine, flamed processing machine, line resin polisher, quarry wire saw equipment and so on.

3. For marble, it can also improve the wear resistance of its surface, so that its gloss can be maintained longer. Due to the difference in the texture of marble floors, such maintenance is generally required in about two months, but the specific time depends on the degree of wear of the marble surface.

4. The severely worn marble furniture is difficult to handle, can be wiped with steel wool, and then polished with an electric grinder to restore it to its original luster.

a. Spray stone care machine with nano wool pad (cleaning pad) 1-2 times a week (if 300-400 rpm high-speed machine is better) spray a small amount of crystal surface maintenance agent or crystal on clean or washed ground Hard powder (crystal hard powder must be added with water, the amount of water depends on the humidity, the amount of water should be more when the weather is dry) 1-2 grams per square meter.

b. Coat it evenly with a stone care machine, then grind until it is bright.

c. Finally, use the dust pusher to push the dust off the ground.

Precautions:

1. The stone surface should be dry and smooth. After the renovation, use animal hair pads or nano wool pads to dry the ground temperature to about 50 degrees and then do the crystal surface treatment.

2. Use clean steel wool and scouring pads.

3. When you see it, you should close it immediately.

4. It is best to use neutral crystal surface agent and neutral refreshing slurry.

5. The scouring pad should be kept clean. When there is too much powder on it, the effect will be affected. Depending on the work area, bring enough scouring pads, and the contaminated ones should be washed and dried before use.

6. On the smooth dark ground, the pad can be changed to a steel wool pad, the effect is better, but it should be noted that the ground is not smooth, or the steel wool pad stain will make the ground black.

7. It should be sprayed in sections, each section is 1-2 square meters.

Contact:

Daisy Huang

Whatsapp&wechat:+86 18859970759

Email:daisy@dafonmachine.com

Website:www.dafonmachine.com