Influence of thickness of the stone plate

1. Impact on cost

The cut thickness of block material will affect the output rate. The thinner the plate, the higher the output rate, and the lower the price.

For example, the marble output rate, assuming the 2.5MM saw blade thickness

Square slabs per cubic meter of marble block:

18 thickness can produce 45.5 square meters of plate

20 thickness can produce 41.7 square meters of plate

25 thickness can produce 34.5 square meters of plate

30 thickness can produce 29.4 square meters of plate

Calibration machine mainly used for processing stone surface by equal thickness, can effectively eliminate blade imprint and avoid stone surface waves, make products smoothly and thickness uniformly, and can be componen for automatic polishing line.

DAFON main product is Curbstone/kerbstone/paver stone cutting machine line, we also have block cutter, Infrared bridge cutting machine, stone slicing machine, edge grinding machine, chamfering machine, bush hammer machine, flamed processing machine, line resin polisher, quarry equipments and so on.

2. Impact on stone quality

The thinner the sheet, the weaker the compression resistance:

The sheet is thin, with poor compression resistance, and is easily damaged; the sheet is thick, with strong compression resistance, and the sheet is not easily damaged.

3. Lesions may appear

If the board is too thin, it may cause the color of cement and other adhesives to reverse osmosis and affect the appearance;

Sheets that are too thin are more susceptible to lesions than thick plates: they are easily deformed, warped, and hollow.

4. Impact on the service life

Because of its peculiarity, stone can be polished and refurbished after a period of use to make it shine again.

Stones will wear to a certain extent during the sanding and refurbishing process. Stones that are too thin may have quality risks over time.

Contact:

Daisy Huang

Whatsapp&wechat:+86 18859970759

Email:daisy@dafonmachine.com

Website:www.dafonmachine.com