1. Cement cleaning agent:

Marble is contaminated with cement. It is recommended to use a cleaning agent that does not react with the calcium carbonate component of the marble: biological cement cleaning agent.

The method of using bio-cement cleaning agent is as follows:

(1)For general cement ash, use a rag to dip the biological cement cleaning agent to wipe the marble directly, then wet the rag and wipe the cleaning agent adhered to the marble surface.

(2)If the cement layer on the marble surface is thicker, you can use a bio-cement cleaning agent to spray directly, wait for a certain period of time, wait for a certain period of time, wait for a certain period of time, after the marble surface cement is softened, then rinse with water or wipe it with a cloth. Wipe it with a clean damp cloth.

2. Spatula:

Attach it to the surface of the marble and embed it with a spatula to remove the cement.

Single-arm block cutters features:

1. Adopt full-sealed cylindrical guide rails to make the machine structure more stable.

2. The hydraulic lifting replaces the traditional screw lifting, reduces wear, reduces maintenance costs and time, reduces production costs, and keeps the machine in the best working state for a long time.

3. The oil cylinder traction trolley solves all the problems of traditional reducer traction, stable and reliable work, long service life, and reduced maintenance frequency.

4. According to the actual needs, it can be equipped with an electric slicing trolley.

DAFON Curbstone/kerbstone/paver stone cutting machine line, double-blade quarry mining equipment, granite/marble block cutters, bridge type edge cutting machine, bottom slab cutting machine, flaming machine, calibration machine, chamfering machine, blind road saw cutting machine and so on.

3. Stone special cleaning agent:

Such products can decompose organic pollution on the surface of the stone and can remove the surface protective agent. If necessary, the cleaning agent can be mixed with the decontamination powder to prolong the reaction time of the compound and absorb the stain into the paste.

Before using the compound, first test small areas that are not conspicuous, such as corners, and ensure that the stone surface is not covered with dark flower marks. The operation of removing minor scratches is relatively simple, and there are many polishing powders on the market. However, when using polishing powder, most of them need to be combined with a polishing machine or a single wiper.

4. Polishing method

This method may be more complicated, but the effect lasts longer. It is best to leave it to a professional to handle it.

Contact:

Daisy Huang

Whatsapp&wechat:+86 18859970759

Email:daisy@dafonmachine.com

Website:www.dafonmachine.com